中文:Capture Studio - Revision history

Facegood: /* 在 Capture Studio, 能够同时监控多少个演员呢？ */

2025-03-27T03:44:28Z

在 Capture Studio, 能够同时监控多少个演员呢？

← Older revision		Revision as of 03:44, 27 March 2025
Line 302:		Line 302:

	===== 在 Capture Studio, 能够同时监控多少个演员呢？ =====		===== 在 Capture Studio, 能够同时监控多少个演员呢？ =====
	在 Capture Studio 可监控的数量没有特定的限制。不过，由于渲染需要占用本地的计算资源，所以你可能需要 CPU 的使用情况来进行相应调整。建议不要同时查看超过 6 ~~个actor。~~		在 Capture Studio 可监控的数量没有特定的限制。不过，由于渲染需要占用本地的计算资源，所以你可能需要 CPU 的使用情况来进行相应调整。建议不要同时查看超过 6 个画面。

Facegood: /* FAQ */

2025-03-27T03:40:18Z

FAQ

← Older revision		Revision as of 03:40, 27 March 2025
Line 287:		Line 287:
	== FAQ ==		== FAQ ==

	=== ~~Common Problem~~ ===		=== 常见问题 ===

	===== ~~Does~~ Capture Studio ~~support regular webcam recording or other devices?~~ =====		===== Capture Studio 支持使用普通网络摄像头进行录制或者支持其他设备吗？ =====
	Capture Studio ~~only supports the~~ FACEGOOD ~~Stereo-HMC~~ P2 ~~system at the moment. Other systems cannot be controlled using Capture Studio for now.~~		Capture Studio 仅支持 FACEGOOD P2 系统。



	~~===== What video formats does Capture Studio output? =====~~
	~~The videos recorded with the P2 system are saved in MOV format.~~

			===== Capture Studio 输出的视频格式有哪些？ =====
			录制的视频以 MOV 格式保存。


	~~===== In Capture Studio, how many screens can be monitored simultaneously? =====~~
	There is no specific limit on the number of screens that can be monitored in Capture Studio. However, since screen rendering requires local computational resources, you may need to adjust accordingly based on CPU usage. '''It is recommended not to monitor more than 6 screens simultaneously.'''


			===== 在 Capture Studio, 能够同时监控多少个演员呢？ =====
			在 Capture Studio 可监控的数量没有特定的限制。不过，由于渲染需要占用本地的计算资源，所以你可能需要 CPU 的使用情况来进行相应调整。建议不要同时查看超过 6 个actor。

	~~===== Capture Studio supports a maximum of how many hardware devices to record simultaneously? =====~~
	~~Based on the number of subscriptions purchased by the user, a specified number of synchronous recording capabilities will be provided.~~



	===== ~~Dark image of the P2 recording~~? =====		===== Capture Studio 最多支持同时录制多少个硬件设备呢? =====
	~~Adjust the brightness and contrast settings within Capture Studio to maintain the principle of keeping the face bright while keeping the surroundings darker.~~		根据用户购买的订阅数量，将会提供特定数量的同步录制功能。



	~~===== When using Capture Studio, the CPU usage reaches 100%? =====~~
	When multiple SmartUnits are connected and camera monitoring is opened simultaneously in Capture Studio, the local computational resources are consumed for rendering the images, leading to high CPU usage. To reduce CPU usage, you can adjust your head-worn device and then click the 'eye button' in the image to turn off monitoring. It's important to emphasize that the increase in CPU usage does not affect the quality of the recorded video, as recording always takes place internally within the SmartUnit. Capture Studio is primarily used for monitoring and control.

			===== P2 录制的图像偏暗？ =====
			在 Capture Studio 中调整亮度和对比度设置，遵循在让脸部保持明亮的同时使周围环境暗一些的原则。


	~~===== Can recording be done when turning off screen monitoring in Capture Studio? =====~~
	Yes, to reduce the CPU load on your computer, you can choose to turn off screen monitoring after adjusting the headset. This way, when you start recording, the unmonitored screen can still be recorded.


			===== 在使用 Capture Studio 时， CPU 的使用率达到了 100% 怎么办？ =====
			当在 Capture Studio 中同时连接多个 SmartUnit 并开启摄像头监控时，本地计算资源会被用于渲染图像，从而导致 CPU 使用率升高。为了降低 CPU 使用率，你可以调整头戴设备，然后点击图像中的 “眼睛按钮” 关闭监控。需要着重强调的是，CPU 使用率的上升并不会影响录制视频的质量，因为录制始终在 SmartUnit 内部进行。Capture Studio 主要用于监控和控制。




			===== 在 Capture Studio 中关闭屏幕监控后还能进行录制吗？ =====
			可以。为了减轻计算机的 CPU 负担，你可以在调整好头戴设备后选择关闭屏幕监控。这样一来，当你开始录制时，即便屏幕未被监控，也仍然可以进行录制。




			===== 为什么在 Capture Studio 中会出现延迟或轻微的画面撕裂现象呢？ =====
			Capture Studio 与 SmartUnit 之间是通过无线网络（WiFi）连接的。当路由器的资源被过度占用，或者 WiFi 信号质量较差时，就可能会出现严重的延迟和数据包丢失的情况，进而导致一些画面撕裂现象。不过，这并不会影响录制视频的质量，因为录制始终是在 SmartUnit 内部进行的。Capture Studio 主要用于监控和控制。

	~~===== Why is there a delay or slight screen tearing in the Capture Studio? =====~~
	The connection between Capture Studio and SmartUnit is established via WiFi. When the resources of the router are overly utilized or the quality of the WiFi signal is poor, significant delays and packet loss may occur, leading to some screen tearing. However, this does not affect the quality of the recorded video, as the recording always takes place internally within the SmartUnit. Capture Studio is mainly used for monitoring and control.

Facegood: /* RealTime */

2025-03-27T03:32:56Z

RealTime

← Older revision		Revision as of 03:32, 27 March 2025
Line 328:		Line 328:


	=== ~~RealTime~~ ===		=== 实时驱动 ===

	===== ~~How many actors can be supported for real-time driving at the same time?~~ =====		===== 同时可以支持多少位演员进行实时驱动呢？ =====
	~~Based on the number of subscriptions purchased by the user, a specified amount of real-time functionality will be provided. In fact, it supports an infinite number.~~		根据用户购买的订阅数量，将会提供特定数量的实时功能。实际上，它支持的数量是没有上限的。



	===== ~~Can real-time data of an actor be sent to multiple target addresses simultaneously?~~ =====
	~~Of course, you can add multiple target addresses in the settings and then click the start button.~~		===== 一个演员的实时数据能够同时发送到多个目标地址吗？ =====
			当然，你可以在设置中添加多个目标地址，然后点击开始按钮。
	[[File:Camera Setting.png\|center\|thumb\|1247x1247px]]		[[File:Camera Setting.png\|center\|thumb\|1247x1247px]]


	~~=== Remote Triggering ===~~

	===== ~~Does it support motion capture synchronized triggering?~~ =====		=== 动捕触发 ===
	~~YES. Capture~~ Studio ~~natively supports synchronous triggering for Xsens, Optitrack, and~~ Vicon~~, eliminating the need to purchase third-party motion capture software. Additionally, Capture Studio is compatible with third-party motion capture triggering software such as~~ PeelCapture.
			===== 它支持动作捕捉同步触发吗？ =====
			是的。Capture Studio 原生支持对 Xsens、Optitrack 和 Vicon 等的触发，无需购买第三方动作捕捉软件。此外，还与诸如 PeelCapture 等第三方动作捕捉触发软件兼容。

Facegood at 03:29, 27 March 2025

2025-03-27T03:29:13Z

Show changes

Facegood at 03:05, 27 March 2025

2025-03-27T03:05:40Z

← Older revision		Revision as of 03:05, 27 March 2025
Line 1:		Line 1:
	~~[[中文:Capture Studio]]~~

	Capture Studio is a next-generation high-precision facial capture software launched by FACEGOOD, primarily targeting enterprise-level, large-scale, multi-actor facial capture scenarios, providing motion capture teams with 24/7 uninterrupted, stable, wireless, multi-channel, real-time, recording, and motion capture-triggered facial capture capabilities.[[File:Capture studio logo.png\|thumb\|Capture Studio\|300x300px]]Paired with the FACEGOOD Stereo-HMC P2 binocular hardware system, this hardware system adopts the SmartUnit edge computing architecture, separating computation from control, enabling Capture Studio to be installed on any desktop computer running Windows, significantly lowering the software installation threshold. Meanwhile, based on the SmartUnit architecture, the P2 hardware system reduces the number of spare parts by 50% compared to the previous generation P1 system, making it easier to maintain and use. The SmartUnit edge computing architecture of the P2 provides ample computing power for motion capture teams, allowing for an unlimited number of synchronized actors. Capture Studio's real-time facial capture capability is outstanding, with built-in SeattleAI technology supporting real-time facial capture for actors of any ethnicity and age group, directly driving 660 blend shapes and 820 bone points of metahuman binding, with an accuracy 20 times that of ARKit. Additionally, motion capture teams can conduct AI training for their own binding systems to achieve higher precision in the end.		Capture Studio is a next-generation high-precision facial capture software launched by FACEGOOD, primarily targeting enterprise-level, large-scale, multi-actor facial capture scenarios, providing motion capture teams with 24/7 uninterrupted, stable, wireless, multi-channel, real-time, recording, and motion capture-triggered facial capture capabilities.[[File:Capture studio logo.png\|thumb\|Capture Studio\|300x300px]]Paired with the FACEGOOD Stereo-HMC P2 binocular hardware system, this hardware system adopts the SmartUnit edge computing architecture, separating computation from control, enabling Capture Studio to be installed on any desktop computer running Windows, significantly lowering the software installation threshold. Meanwhile, based on the SmartUnit architecture, the P2 hardware system reduces the number of spare parts by 50% compared to the previous generation P1 system, making it easier to maintain and use. The SmartUnit edge computing architecture of the P2 provides ample computing power for motion capture teams, allowing for an unlimited number of synchronized actors. Capture Studio's real-time facial capture capability is outstanding, with built-in SeattleAI technology supporting real-time facial capture for actors of any ethnicity and age group, directly driving 660 blend shapes and 820 bone points of metahuman binding, with an accuracy 20 times that of ARKit. Additionally, motion capture teams can conduct AI training for their own binding systems to achieve higher precision in the end.

Facegood: Created page with "中文:Capture Studio Capture Studio is a next-generation high-precision facial capture software launched by FACEGOOD, primarily targeting enterprise-level, large-scale, multi-actor facial capture scenarios, providing motion capture teams with 24/7 uninterrupted, stable, wireless, multi-channel, real-time, recording, and motion capture-triggered facial capture capabilities.300x300pxPaired with the FACEGOOD Stereo..."

2025-03-27T03:05:23Z

Created page with "中文:Capture Studio Capture Studio is a next-generation high-precision facial capture software launched by FACEGOOD, primarily targeting enterprise-level, large-scale, multi-actor facial capture scenarios, providing motion capture teams with 24/7 uninterrupted, stable, wireless, multi-channel, real-time, recording, and motion capture-triggered facial capture capabilities.thumb|Capture Studio|300x300pxPaired with the FACEGOOD Stereo..."

New page

[[中文:Capture Studio]]

Capture Studio is a next-generation high-precision facial capture software launched by FACEGOOD, primarily targeting enterprise-level, large-scale, multi-actor facial capture scenarios, providing motion capture teams with 24/7 uninterrupted, stable, wireless, multi-channel, real-time, recording, and motion capture-triggered facial capture capabilities.[[File:Capture studio logo.png|thumb|Capture Studio|300x300px]]Paired with the FACEGOOD Stereo-HMC P2 binocular hardware system, this hardware system adopts the SmartUnit edge computing architecture, separating computation from control, enabling Capture Studio to be installed on any desktop computer running Windows, significantly lowering the software installation threshold. Meanwhile, based on the SmartUnit architecture, the P2 hardware system reduces the number of spare parts by 50% compared to the previous generation P1 system, making it easier to maintain and use. The SmartUnit edge computing architecture of the P2 provides ample computing power for motion capture teams, allowing for an unlimited number of synchronized actors. Capture Studio's real-time facial capture capability is outstanding, with built-in SeattleAI technology supporting real-time facial capture for actors of any ethnicity and age group, directly driving 660 blend shapes and 820 bone points of metahuman binding, with an accuracy 20 times that of ARKit. Additionally, motion capture teams can conduct AI training for their own binding systems to achieve higher precision in the end.

'''[https://www.facegood.ca/download-detail?id=5&type=win DOWNLOAD] NOW!!!'''

'''<big>Enjoy simultaneous recording by multiple people and real-time interaction without interruption, unlocking a brand-new experience of collaborative creation among multiple individuals!</big>'''

<big>'''Multiple'''</big> people record and stream in realtime <big>'''simultaneously'''</big>.

* Timecode

* Motion capture trigger

[[File:Capture Studio Recoding and Realtime.png|frameless|1200x1200px]]

'''Note:'''

'''① Capture Studio software only supports the FACEGOOD Stereo-HMC P2 binocular hardware system at the moment. Other HMC devices cannot be controlled using Capture Studio.'''

② The camera of P2 is a 920nm infrared camera, which can block indoor lighting sources. However, outdoor infrared sources may interfere with the camera's operation, potentially causing overexposure in backlit conditions.
[[File:Capture Stuido Topology.png|center|frameless|1404x1404px]]

== Quick Intro ==

==== Log in to Capture Studio ====

* Open Capture Studio and enter your account credentials to log in at the login screen.
[[File:Log In Page.png|center|thumb|1458x1458px|Open Capture Studio and enter your account credentials to log in at the login screen.]]

==== Search for SmartUnit and join ====
When you get SmartUnit for '''the first time''', you need to go through the following steps to make Capture Studio discover it.

===== Preparation =====

# Monitor
# Keyboard and Mouse
# Ethernet Cable (optional)

===== Connection and Startup =====

# Connect the Monitor
#* Find the HDMI cable provided in the packaging and connect the SmartUnit to the monitor.
# Connect the keyboard and mouse, then power on the device.
# Login to the System
#* Enter the password `facegood` (lowercase) to access the main interface.
[[File:Log In SmartUnit.png|center|1920x1920px|frameless]]

===== Connect to WIFI =====

* Select Network
** Click the button in the upper right corner and choose `Select Network`.
[[File:Select WIFI.png|center|frameless|1883x1883px]]
* Connect to WIFI
** In the WIFI list that appears, select the WIFI that is on the same local network as your Windows host.
[[File:Select WIFI Table.png|center|frameless|1883x1883px]]

===== Use Capture Studio on Windows =====
# Search for SmartUnit
# Open Capture Studio on Windows, and it should detect the SmartUnit.
<gallery mode="nolines" widths="900" heights="934">
File:Search SmartUnit.png|alt=
File:Connect SmartUnit.png|alt=
</gallery>
* Troubleshooting if SmartUnit is Not Detected
** Follow the steps below to diagnose the issue.

===== Find the IP Address of SmartUnit =====

====== Method 1: Find IP Address via Settings ======

* Open Settings
** Click `Setting` in the upper right corner.
[[File:Select Setting.png|center|frameless|1883x1883px]]
* Find WIFI IP Address
** On the left side, go to the `WI-FI` option and click the gear icon next to `Connected` on the right side.
** In the window that appears, the `IPv4 Address` is the WIFI IP address.
[[File:WIFI Table.png|center|frameless|1920x1920px]]
[[File:WIFI Info.png|center|frameless|1920x1920px]]

* Find Ethernet IP Address
** If an Ethernet cable is connected, go to the `Network` option on the left side and click the gear icon next to `Wired`.
** In the window that appears, the `IPv4 Address` is the Ethernet IP address.
** '''Note:''' The two IP addresses are different.

[[File:Cable Table.png|center|frameless|1920x1920px]]
[[File:Cable Info.png|center|frameless|1920x1920px]]

====== Method 2: Find IP Address via Terminal ======

# Open Terminal
#* Right-click on the desktop and select `Open in Terminal`.
[[File:Open Terminal.png|center|frameless|1883x1883px]]
# Enter Command to View IP Address
#* Enter `ifconfig`: The `inet` under `enpxxx` is the Ethernet IP address, and the `inet` under `wlo1` is the WIFI IP address.
[[File:Check Ip.png|center|frameless|1883x1883px]]

===== Check Connection on Windows =====

# Open Command Prompt
#* Press `Ctrl+R` on Windows, type `CMD`, and press Enter to open the Command Prompt.
# Enter ping Command
#* Type `ping -t xxx.xxx.xxx.xxx` (preferably the Ethernet IP address) and check the result.
#** '''Result 1''': If you get "Destination host unreachable"; you are not on the same local network, please contact your IT department.
#** '''Result 2''': If you get replies, everything is normal, and you can find the SmartUnit in Capture Studio.
<gallery widths="1000" heights="600">
File:Destination host unreachable.png|alt=
File:Destination host repson.png|alt=
</gallery>

By following these steps, you should be able to successfully connect and use the SmartUnit. If you encounter any issues, please contact technical support.

==== Adjust the camera parameters ====

* Click on the "Eye Button" in the display area to show the camera feed.
[[File:Capture Stuido Mointor.png|center|frameless|1458x1458px]]
* Click on the "settings button" in the bottom left corner of the screen to adjust recording information.
[[File:Camera Setting.png|center|frameless|1248x1248px]]

==== Adjust helmet wearing ====

* When wearing the helmet, remove glasses and ensure hair does not cover the eyebrows. If the screen is blurry, check for '''any dirt obstructing the lens'''. With the P2 helmet, adjust the focus by twisting the lens direction.
* Adjustment criteria:
*# Ensure the actor's facial features are clear and unobstructed.
*# Align the center of the nose with the center of the camera.
*# Maintain clear focus without overexposure or underexposure.

==== Record and download ====
* Start/stop recording (recorded content will be saved in SmartUnit).[[File:Record Bar.png|center|frameless|1081x1081px]]
* The download interface will display all video files from connected SmartUnits.

* After setting the download location, click "Download."
[[File:Download List.png|center|frameless|1292x1292px]]

==== RealTime ====

===== View in Capture Studio =====
To configure real-time capture settings, click the "Settings" button in the bottom left corner of the screen. You'll need to choose the Avatary.AI type (Metahuman\ARKit). [[File:Select AVATARY.AI.solver.png|center|frameless|1248x1248px]]

Then, click "choose real-time solving" to select the current frame for real-time solving. Finally, click the "Start" button.

[[File:Start Realtime Capture.png|center|frameless|1248x1248px]]Back on the main page, open the "expression tuning" subpage in the title bar. Here, you'll be able to see the real-time driving effects of the built-in models in the capture studio.

'''NOTICE:''' To reduce power consumption and improve battery life. After clicking Start, calculation will only begin when '''there is a human face''' in the picture.[[File:Expression Tuning.png|center|frameless|1847x1847px]]

These steps will help you easily set up real-time capture settings and adjust expressions during the capture process for more accurate and realistic results.

===== View in UE =====
Please use '''UE5.3 or above''', please refer to the UE tutorial from '''this [[UnrealEngine|link]].'''

== Calibrate Headset ==

==== Overview ====
Capture Studio provides two methods, '''screenshot and ruler''', to calibrate the position of the helmet. These methods ensure maximum consistency in the helmet's position during each recording. Typically, helmet calibration is used for facial expression library solving and custom training projects.

==== Usage instructions ====

===== Snapshot =====

* Please right-click on the screen and select "Snapshot," then click "Console" to view the location where the screenshot is saved.
* When you need to record again, load the previously saved actor's screenshot so the software can quickly and accurately locate the position of the helmet from the previous session, thus improving work efficiency.
* After loading the screenshot, the previous helmet position will be displayed as a ghost image on the screen. At this point, align the positions of the sides of the nose and try to align the corners of the eyes and mouth with the ghost image as much as possible.
* It's important to note that different helmets may have different lens settings. Therefore, after changing the helmet, it may not be possible to adjust to the exact same angle as the previous helmet.
<gallery widths="500" heights="400" mode="nolines">
File:Select Snapshot.png|alt=
File:Snapshot Console.png|alt=
File:Show Snapshot.png|alt=
</gallery>

===== Ruler =====

* Our software supports dragging out annotation lines, allowing you to quickly and accurately locate the previous position of the helmet.

* Right-click on the screen and select "Show face rule" to enable this feature. Once enabled, simply drag out the annotation lines from the left or top of the screen to use them.
<gallery widths="700" heights="400" mode="nolines">
File:Select Face Rule.png|alt=
File:Show Face Rule.png|alt=
</gallery>

== Audio & Timecode Device ==
===== Audio =====

* Using the P2 in Capture Studio will automatically use the P2's built-in audio, so you don't have to choose.

===== Timecode =====
Timecode devices are typically used to ensure frame alignment between multiple videos during animation pipeline. As different computer systems may have time discrepancies, using timecode ensure that the recording time remains consistent across different machines.
====== How to connect timecode device ======

* After connecting SmartUnit and Timecode using Timecode cable, set it in the Timecode option in the camera settings interface.
* How to connect SmartUnit with Timecode, [https://www.facegood.ca/wiki/index.php?title=Stereo-HMC_P2#P2_SmartUnit_Connect_Timecode please see here].
[[File:Camera Setting.png|center|thumb|1248x1248px|time code setting]]

====== Capture Studio setting ======
Once the timecode hardware is connected

# In the audio settings tab, select the timecode device from the dropdown menu.
# Click the "Open" button next to the TimeCode to establish the timecode connection.
# After click 'Open', the timecode information will be displayed in real-time in the time information section below.
# Offset: to adjust the timecode offset by one unit of time.

== Motion Capture Trigger ==

===== Overview =====

* Within the same LAN, the motion capture device triggers the facial capture recording, enabling synchronized recording of motion capture and facial capture. The naming convention for synchronized recording files is as follows:

'''{motion trigger name}_{performer name}_TOP/BOT.mov'''

===== Currently supported motion capture devices =====

* '''Optitrack'''

* '''Vicon'''

* '''Xsense'''
* '''Rokoko'''
* '''Qualisys'''
* '''AxisStudio'''
* '''CMAvatar'''
* '''XINGYING'''

* '''PeelCapture'''

===== How to use =====

* In Capture Studio, check the motion capture trigger option and select the corresponding motion capture device. Set the signal port to match the one on the motion capture.
* On the motion capture software, set the same port number as well.
* Set the file name on the motion capture software.
[[File:Search Motion Capture Type.png|center|frameless|1456x1456px]]

====== Optitrack ======

# Enable Remote Trigger.
# Fill in the XML Broadcast Port into Capture Studio.
[[File:Optitrack1.png|center|thumb|1335x1335px]]
'''XML Triggering Port:''' Command Port (Advanced Network Settings) + 2. This defaults to 1512 (1510 + 2).

'''If you can not find XML Broadcast Port, you can check Optitrack document. [https://docs.optitrack.com/motive/data-streaming#xml-broadcast-port V3.1], [https://docs.optitrack.com/v/v3.0/motive/data-streaming#remote-triggering V3.0]'''

====== Vicon ======

# Enable '''Triggered Capture'''.
# Set the same port number.
# Enable recording at the motion capture.
[https://help.vicon.com/space/Shogun112/31233490/Control+remote+capture Vicon Document][[File:Vicon.png|center|frameless|962x962px]]

====== Xsense ======
[https://base.movella.com/s/article/UDP-Remote-Control?language=en_US Xsense document]
====== Rokoko ======
[https://support.rokoko.com/hc/en-us/articles/14905272191505-Rokoko-Studio-UDP-Trigger-Messages Rokoko document]
====== Qualisys ======
[https://docs.qualisys.com/qtm/#Project_options/udp_trigger.htm Qualisys Document]
== Capture Studio Monitor ==
Capture Studio Monitor is software used to monitor the running status of Capture Studio in the local area network.

'''[https://www.facegood.ca/download-detail?id=9&type=win Download Now]!!!'''

=== Usage scenario ===
After configuration, with the motion capture trigger function, '''one person''' can control motion capture and facial capture at the same time, and monitor the status of both at the same time.

=== How to use ===

* Set the monitoring port in Capture Studio
[[File:Capture Studio Monitor Setting.png|center|frameless|1456x1456px]]
* Open Capture Studio Monitor on another computer and set the same port.

[[File:Capture Stuido Mointor Software.png|center|frameless|730x730px]]

* In this way, the configuration is completed, and the operations in Capture Studio can be monitored in Capture Studio Monitor. If an error occurs, '''a red reminder''' will appear.
[[File:Capture Stuido Mointor Software Text.png|center|frameless|725x725px]]

== FAQ ==

=== Common Problem ===

===== Does Capture Studio support regular webcam recording or other devices? =====
Capture Studio only supports the FACEGOOD Stereo-HMC P2 system at the moment. Other systems cannot be controlled using Capture Studio for now.

===== What video formats does Capture Studio output? =====
The videos recorded with the P2 system are saved in MOV format.

===== In Capture Studio, how many screens can be monitored simultaneously? =====
There is no specific limit on the number of screens that can be monitored in Capture Studio. However, since screen rendering requires local computational resources, you may need to adjust accordingly based on CPU usage. '''It is recommended not to monitor more than 6 screens simultaneously.'''

===== Capture Studio supports a maximum of how many hardware devices to record simultaneously? =====
Based on the number of subscriptions purchased by the user, a specified number of synchronous recording capabilities will be provided.

===== Dark image of the P2 recording? =====
Adjust the brightness and contrast settings within Capture Studio to maintain the principle of keeping the face bright while keeping the surroundings darker.

===== When using Capture Studio, the CPU usage reaches 100%? =====
When multiple SmartUnits are connected and camera monitoring is opened simultaneously in Capture Studio, the local computational resources are consumed for rendering the images, leading to high CPU usage. To reduce CPU usage, you can adjust your head-worn device and then click the 'eye button' in the image to turn off monitoring. It's important to emphasize that the increase in CPU usage does not affect the quality of the recorded video, as recording always takes place internally within the SmartUnit. Capture Studio is primarily used for monitoring and control.

===== Can recording be done when turning off screen monitoring in Capture Studio? =====
Yes, to reduce the CPU load on your computer, you can choose to turn off screen monitoring after adjusting the headset. This way, when you start recording, the unmonitored screen can still be recorded.

===== Why is there a delay or slight screen tearing in the Capture Studio? =====
The connection between Capture Studio and SmartUnit is established via WiFi. When the resources of the router are overly utilized or the quality of the WiFi signal is poor, significant delays and packet loss may occur, leading to some screen tearing. However, this does not affect the quality of the recorded video, as the recording always takes place internally within the SmartUnit. Capture Studio is mainly used for monitoring and control.

=== RealTime ===

===== How many actors can be supported for real-time driving at the same time? =====
Based on the number of subscriptions purchased by the user, a specified amount of real-time functionality will be provided. In fact, it supports an infinite number.

===== Can real-time data of an actor be sent to multiple target addresses simultaneously? =====
Of course, you can add multiple target addresses in the settings and then click the start button.
[[File:Camera Setting.png|center|thumb|1247x1247px]]

=== Remote Triggering ===

===== Does it support motion capture synchronized triggering? =====
YES. Capture Studio natively supports synchronous triggering for Xsens, Optitrack, and Vicon, eliminating the need to purchase third-party motion capture software. Additionally, Capture Studio is compatible with third-party motion capture triggering software such as PeelCapture.